Welcome to Crevice Reamer's Website
X3/SX3 SMALL MILL

NICETIES:
T SLOT COVERS:

These are nice to have. They keep chips out of T slots, and can be cut to fit around vises etc.

I made mine from some Vinyl J mold available from Lowes: $1.73 for 10 foot length, from the drywall department.

http://www.lowes.com/lowes/lkn?action=productDetail&productId=15437-205-37120&lpage=none

Just cut it to length and trim for fit to lower T width. It wedges right into the X3 T slots.
Photobucket 

This material is flexible enough to slide right in:
Photobucket

Photobucket 
Notice the inexpensive motor covers. They come in two sizes that perfectly fit N23 and N34.

For the side channels, it's a little more cutting, and they don't fit as tight.
Photobucket 

And the end bays are just the wide side UP:
Photobucket 
One 10 foot length did all of this.

CR.





Web Hosting Companies